Product

3001CRACK FILLER EPOXY LIQUID (2 PACK)SEALENT

For crack filling of walls. Can be used in compound injection machine for high-pressure crack filling of hairline cracks & for reverse pressure. It is two component epoxy based primer with good penetrative properties, exposes the cracks when applied on superficial layer & seeps into the cracks when pressured by injection machine. This product can be used in water tanks also as this product is NSF approved.

3002FOODGRADE WATER TANKS INTERNAL COATING (2 PACK)LINERS

Nsf & cftri approved product and adheres to BS6920 for sealing & filling of underground or overhead water tanks for crack filling & tank linings.EPOXY FG WATER TANK LINER is a, two components, and high solid 100% epoxy coating. System consist of an epoxy resin and polyamine hardener. It is specially formulated to give superior mechanical properties such as adhesion, abrasion resistant and excellent chemical resistance, damp surface adhesion, water immersion, sea water, cathodic disbandment, ground waters over a broad PH range. It has high build cross linking density & Passes 5000 hrs salt spray test & can give 300-500 microns dft. in single coat.

Major Uses
  • Ideal for machine shops, heavy engineering plants, chemical process areas, passenger walkways in airports when an attractive appearance must be coupled with exceptional wear resistance and laboratories subjected to mild acids and spillages. Radial Gate and Hoist Mechanism at the dams.
  • It is also widely used for commercial and industrial establishments, heavy-duty loading bays and storage. On floors such as breweries, textile mills, distilleries and other food processing, Tank linings and manufacturing industries.
Advantages
  • Solvent free – low odor
  • High chemical resistance
  • Hard wearing
  • Easy to clean – seamless
  • Flexible and waterproof
  • Available in select range of color
  • Exceptional wear – resistance
  • Non – slip also Available
  • Excellent abrasion resistant
30032 PACK EPOXY MASTIC BLACKSEALENT

EPOXY MASTIC is a high solid epoxy, formulated & designed to be self-primed, resist water absorption, high humidity, mild acids, alkali, solvents and other corrosion elements. It gives excellent adhesion and waterproofing protection of concrete, steel exposed to the corrosive atmosphere.

Major UsesAdvantages
Storage tanksFlexible
Pipelines (interior and exterior)Chemical resistant
Processing EquipmentAbrasion resistant
Tidal zone areas (fresh and salt water)Impact resistant
Sewage tanksResistant to dimensional changes (No chipping, peeling or flaking)
3004PU EXTERIOR WALL COAT (2K)SEALENT

PU Exterior wall coat is a premium Acrylic Polyurethane finish that is ideal for both interior & Exterior Walls. It Protects wall from rain, Smoke, Dust, Chemicals, UV Rays & is highly resistant to Algae, Fungi, Moss & gaseous Reactions. With high colour retention & Chalk resistance it can give a service life of 10 years very easily. The finish is washable & also promotes hygiene when used on interiors like Operation Theaters, Surgical Wards, Pharmaceutical factories, Breweries, Factories etc. Ideal for Bunglows, Corporate Offices & Multistoried Buildings.

3005SINGLE PACK BUTIMIUOUS CRACK & JOINT FILLER (THICK)WATER PROOF COATINGS

Based on bitumen & complex organic chemicals and rich minerals, BCJS is a thick, semi solid Putty like, White Spirit based, deep penetrating bituminous solution, and is black in colour.

ADVANTAGES
  • Single-component
  • Can be applied to damp surfaces
  • Forms elastic water-proof film
  • No skilled labour required
  • Ready-to-use
  • Excellent adhesion to all surfaces.
  • Resistance to temperatures around 80 to 90 C
  • Most Economical and durable water proofing
AREAS OF APPILCATION
  • As road marking paint
  • For waterproofing
  • Mastic asphalt for roads & floors
  • On any metal surface (pipes, bars, etc.)
  • Over brick masonary & Concrete
  • On TMT bars used for construction
  • Damp Proofing
  • Foam Concreting On terrace floors or to fill cracks
  • On old painted surfaces
  • Thick Coat As a Sound Proofing
3006SINGLE PACK BUTIMIUOUS CRACK & JOINT FILLER (THIN)WATERPROOF COATINGS

An anticorrosive & waterproofing paint, composed of bitumen, volatile organic solvent & special minerals, is considered having one of the best & cheapest Anticorrosive properties, & easiest to apply as no undercoat is required.

ADVANTAGES
  • Single-component, ready-to-use.
  • Excellent adhesion to all surfaces
  • Resistance to temp. 80 to 90 C
  • Economical and durable
  • Can be applied to damp surfaces
  • Forms elastic, water-proof film
  • No skilled labour required
  • For quick repair over bitumen flats
AREAS OF APPLICATION
  • As road marking the paint
  • On TMT bars used for construction
  • For waterproofing, Damp Proofing, Mastic asphalt for roads & floors, Foam Concreting. On terrace floors or to fill cracks
  • On any metal surface (pipes, bars, etc.)
  • On old painted surfaces
  • Over brick masonry & Concrete
  • Thick Coat As a Sound Proofing
  • For quick plugging of leaks over tar, bitumen, tear sheets, etc
  • Good for soak pits, sewers, effluent tank, etc
3008SINGLE PACK EPOXY CHEMICAL & WATER RESISTANT SEALENTSEALENT

Single pack easy to apply, brush able epoxy sealant.

Features
  • Best to be used for back side of tiles, wood
  • Works as a barrier coating
  • Highly resistant to chemicals & salt water
  • Can be recoated easily
3009SINGLE PACK ACRYLIC SEALANTSEALENT

Single pack, air drying acrylic based coating

Features
  • Topcoat in thermoplastic system
  • Resistance to the splash of mild chemicals
  • Fast drying
  • Can be applied at low temperature down to -10 C
  • Avoid use of this product in areas where splashes / spillage of solvents occur
3051EPOXY TILE GROUT (2 PACK)GROUT

Epoxy tile grout is a solvent-free liquid epoxy-based Resin & Hardener, comprising of a coloured liquid resin as Part A & liquid hardener. It is a two component product which durable, hygienic and chemically resistant. Epoxy base tile grout with ease of application and water wet-able clean off properties. Imparts high hardness, abrasion resistance & anti-stain properties. Suitable for both floors & wall up to tile width 2mm to 12 mm.

ADVANTAGES
  • It is through an excellent bonding strength
  • Resistance to Thermal Expansion
  • FDA & WARS approved
  • High resistant to wear and tear
  • Shrink Free
  • It is water and chemical resistant
  • Resistant to Bio Growth
  • Meets food hygiene regulation
  • Grouting joints up to 20mm width
  • Aesthetic look
USES
  • Suitable for Ceramics tiles, Mosaics, Terrazzo, quarry and natural stone tiles, vitrified.
  • Mosaics in interior and exterior installation
  • Tile joints in swimming pools
  • Tile joints Airports, Industries, residence & commercial Complex etc where there is constant stress due to heavy traffic
3052EPOXY CRACK FILLER (2 PACK)GROUT

It is a two component semi flowable chemical, having high penetration property can be used with an injection to fill deep cracks. It can cure even with a very high moisture or even in water.

  • Grouting and sealing of dry, moist and wet cracks in dams, bridges and other concrete structures.
  • Old to new concrete bonding.
  • High strength mortar application for dams and powerhouses.
  • Underwater grouting and sealing of cracks in dams and bridges.
  • We offer chemical and corrosion resistance coating for chemical and fertilizer industry
  • Hygenic coating for pharmaceutical industries
  • Corrosion resistant and protective coating for surfaces exposed to saline atmosphere.
  • Protective coating and lining for potable water tanks and food stuff tanks.
  • Protective coating for pipeline and machinery.
3053TILE JIONING COMPOUNDGROUT

It is a two component semi flow able chemical, having high penetration property can be used with injection to fill deep cracks. It can cure even with a very high moisture or even in water.

  • Grouting and sealing of dry, moist and wet cracks in dams, bridges and other concrete structures./li>
  • Old to new concrete bonding.
  • High strength mortar application for dams and power houses.
  • Can be used on Metal, Concrete, FRP & Glass./li>

Coatings for Rebar

Rust Converter

Rebar Protection Products protect the steel used in reinforced concrete structures around the world. This is a 2 pack coating applied which protect the rebar's in 3 ways.

  • It converts the existing rust into oxide & thus inhibits corrossion
  • Penetration
  • It forms a very thin layer which protects the rebar and avoids further corrosion
  • Adhesion on coated surface increases to a considerable extent

Coatings For Walls

  • Industrial walls tend to become more dirtier as lot of movements of workforce, movement of materials, use of oil greases and many more extreme environmental conditions exists, specially in the field of food & breavage industries. To stand against such conditions we have developed solvent based 1 pack & 2pack epoxies which forms a non absorptive or anti graffiti type of coating which can withstand such extreme conditions & can make industrial walls more clean & hygienic.

  • Moreover cracks or leakages occour due to vibrations of machines & regular putties & primers are unable to solve the problem or re-cracking. Under construction chemicals we have developed Epoxy Putties, Grouts & Crackfill compounds which can solve the problem to a greater extent.

  • High performance epoxy mortar designed as a lightweight repair compound for use on damaged concrete and mineral surfaces in vertical and overhead areas are also developed.

Shade Card

    Click here to chat with us.
    Live Chat